新闻资讯

News Center

current position: Home > News Center > Technical Information

Maintenance of plate

2023-01-05 17:56:45
times

Thin cloth and pure cotton towel should be used as cleaning supplies. It is prohibited to use jade powder, sandpaper, steel brush or other abrasives to clean the surface of medium and thick plates. Loose loading during transportation, resulting in bruises.

The wear-resistant layer is the raw material of high nickel iron alloy, with the macroeconomic strength reaching above HRC50. The mechanism is equipped with many M7C3 hard cementite, with the external economic strength of HV1500~1800. It is in a column structure, with independent conditions everywhere. It supports and promotes each other with the base material, thus mainly showing the ability of high-quality wear-resistant materials to wear.

When the surface of medium and heavy plate manufacturers suffers corrosion and environmental pollution, they should immediately clean it. The scaling can be first cleaned with thin cloth dipped with ethanol or fragrant super glue (first with ethanol, and then with fragrant super glue if it is bad), and then with cold water.

Thin cloth and pure cotton towel should be used as cleaning supplies. It is prohibited to use jade powder, sandpaper, steel brush or other abrasives to clean the surface of medium and thick plates. Clean with warm boiled water containing lubricating liquid or neutral detergent, and medium and heavy plate manufacturers shall not use acidic or slightly alkaline cleaners.

It is easy to polish the anodic oxidation treatment film with high-quality paint maintenance wax for the removed medium and heavy plates, and the medium and heavy plate manufacturers can also evenly spray a layer of acrylic resin based finish paint. According to the natural environment of the application, the medium and thick plates shall be cleaned of air pollutants on time to maintain the glossiness.

The surface layer of wire mesh framework is made of ordinary medium and thick plate lining, which is made of high chromium wear-resistant aluminum alloy, resulting in good metallurgical industry integration, solving the differences between forgeability and wear-resistant performance that can not be adjusted by single materials, giving full play to the wear-resistant and corrosion resistance characteristics of high nickel iron alloy, preserving the original physical properties of ordinary medium and thick plates, and having the ability to resist washing and abrasion and withstand pressure and impact. The comprehensive type can be significantly improved.


Tags

Next:None

Recently Viewed:

/contact

Phone:+86 0315-7961111       E-Mail:shuixinjinshu@163.com 

Address:Tangshan City, Hebei Province, China

Copyright © 2022 Tangshan Fengrun District Shuixin Metal Products Manufacturing Co., Ltd. Disclaimers